·Track by software/by cell phone.
·Over-speed alarm, Low power alarm, Geo-fence alarm.
·Roaming feature to save cost.
·Control or detect the car doors/engine on/off .
·Cut off the engine power Gradually and safely when in urgency.
·GPRS(TCP/UDP), SMS Support.
·OTA, upgrade the firmware via GPRS.
·Backup battery, Send a data every minute,support 12 hours working time.
·Support commands to device via GPRS.
·SMS Link for google map.
·Sending GPRS data to IP or DNS.
·32Mb Flash Memory.
·Fuel/oil level detection.
·Temperature sensors(optional) .
·With Microphone and listen-in function(Two-way conversation).
To set Selfsecurity you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial data from the device and the APN are to APN_OPERATOR
- Set up our operator APN
- Define how often will transmit to our example 120 seconds
- Establish the server where we will connect
- Activate the GPRS mode