Loading...

Noran - NR008

Product Description

NR008 is automobile GPS tracking device, it works with our Auto GPS Tracking system perfectly.

Application:

·Fleet management

·Vehicle rental

·Anti-theft of Vehicle


BRIEF FUNCTION OF AUTOMOBILE GPS TRACKING DEVICE

1. Engine remote control: You can stop oil supply by SMS/ GPRS remotely

2. Over-speed alarm: Both software and authorized mobile number will receive alarm when target is over a specified speed. This speed limitation should be set in advance.

3. SOS Function: Alarm will be sent to software and authorized number when SOS is pressed once emergency.

4. Geo-fence

5. Movement alert: Send a movement alert to the user when it begins to move.

6. Assistant alarm: compatible with original car’s anti-theft system

7. Voice monitoring: Use the authorized number to call the device, you will hear the voice in the vehicle.

8. Anti- dismantle: It will alarm when lose the power of car

Specification

· GSM Module:SIMCOM

· Frequency: 850/900/1800/1900Mhz and 2100MHz(3G)

· Max RF output : 33.0dBm±2dBm: 33.0dBm±2dB

· Dynamic input range : -15 ~ -102dBm -15 ~ -102dBm

· Frequency stabilities: >2.5ppm

· RMS Deviation: ≤5deg

· GPS chipset: SIRF Star

· Channels: 20

· Capture time: 0.1 sec., average

· Hot boot: 2 sec., average

· Warm boot: 38 sec., average

· Cold boot: 44 sec., average

· Height limit: 18000 m

· Speed limit: 515 m/s

This information only is for informational purposes only, Selfsecurity does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up NR008

Country
Operator
APN
User
Password

To set VMHexABFSzVb you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is Jltjxr which is the initial data from the device
you can get the device Id, sending the command to check the device status, the device Id is the first word normally starts with NR

  1. Set up our operator APN
    htjlZOSZV27ilT9H5DwS42PXS3halfEWGkfzm
  2. Establish the server where we will connect
    8iP96GfDziVTHrEVARpeLSfq1y0xlc
  3. Switch to GPRS mode
    AyJf7ehT8vuUd

To check settings qCjHHQrcXhg
Device Id, APN, server, port, GPRS status (1), GPRS connection status (1), GSM signal (1-31)