Loading...

Coban - GPS306

Working Based on existing GSM/GPRS network (850/900/1800/1900Mhz) and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.

Function:

  • Change Password
  • Authorization
  • Single Locating
  • Auto track continuously
  • Automatic update positions of vehicle turns
  • GPS drift suppression
  • Absolute street address by SMS
  • Location based service (LBS)
  • Voice Monitor -Data logging
  • Data Load
  • Forward the third parties’ message
  • Charges Inquiry
  • mainteanance remind alert
  • Low battery alarm
  • External Power off alarm
  • GPS blind Spot alert
  • Geo-fence
  • Multi-area management
  • Movement alarm
  • Over speed alarm
  • Alarm without GSM network service
  • Check the Vehicle State
  • Reset Hardware
  • Sleep Mode
  • Sleep by time
  • Sleep by shock sensor
  • No sleep mode
  • Set up Terminal (local) Time
  • TCP / UDP Switch
  • GPRS setting
  • Setting up APN
  • GPRS User ID and password Setup
  • IP and port setup
  • Less GPRS traffic
  • Modes Switch between “SMS” and “GPRS”
  • Set up monitor center number
This information only is for informational purposes only, Selfsecurity does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up GPS306

Country
Operator
APN
User
Password

To set KnyLTYsDj8oy you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial setting from the device

  1. Factory reset
    bguyIBdHPKp
  2. Set the time zone UTC-0
    DG9d AIw3MwqqTk N
  3. Set up our operator APN
    vatXeGZRi 7QUo1so
  4. Set the username and password of APN operator
    2jtSAZ0Y mANR7O16 YYEycbDF
  5. Establish the server where we will connect
    UwRN1z0t3jQC2 NKQI9eTqOwyMs C6hH
  6. Switch to GPRS mode to begin transmission UDP
    bfnO4aWYdNTFKh
    or
    wmgciU6X5o

To check settings VSVDV4QxUGA