Loading...

Coban - GPS104

Detailed description:
It is based on GSM/GPRS(850/900/1800/1900MHZ)wireless telecommunication internet and GPS satillite global position system,track by several ways.provide monitor software and global map.real-time track through the monitor software in your pc;track through your PDA cell phone and googleearth.

 

Function:

  • Add and Delete Authorization
  • Single Locating
  • Auto track continuously
  • Track with limited times upon time interval
  • Track with unlimited times upon time interval
  • Smart track upon time and distance interval
  • Automatic update positions of vehicle turns
  • GPS drift suppression
  • Get location in absolute street address
  • Location Based Service (LBS)
  • Check the Vehicle State
  • Terminal (local) Time Setting
  • Monitor (Voice Surveillance)
  • Data logging
  • Data Load
  • Forward the third parties’ message
  • Charges Inquiry
  • Cut off the Oil and Power System
  • Execute immediately Mode
  • Execute depends on speed(Default mode)
  • Resume the Oil and Power System
  • Tracker’s Hardware Resetting
  • Sleep Mode
  • Sleep by time
  • Sleep by shock sensor
  • Deep Sleep by Shock Sensor
  • Start Work on specific time
  • No sleep mode
  • Geo-fence
  • Multi-area management
  • Movement alarm
  • Over Speed Alarm
  • Accident alarm (Option)
  • Shock Sensor Alarm
  • SOS
  • Low battery alarm
  • Power off alarm
  • GPS blind Spot alert
  • TCP/UDP switch
  • Configure parameters by USB
  • GPRS Setting
  • Modes Switch between “SMS” and “GPRS”
  • Less GPRS traffic
  • GPRS tracking & monitoring platform
  • Set up monitor center number
This information only is for informational purposes only, Selfsecurity does not have relationship with the device's manufacturer, for more information check the manufacturer's website or user manual.

Set Up GPS104

Country
Operator
APN
User
Password

To set LhLzDqOpFxwZ you need to configure as follows. With the following commands through several text messages: In the example it is assumed that the device password is 123456 which is the initial setting from the device

  1. Factory reset
    NAi27Sf8BTJ
  2. Set the time zone UTC-0
    oN9E xkYdJqnniQ I
  3. Set up our operator APN
    LyStmM1xw EOrbKor
  4. Set the username and password of APN operator
    BCZAywt4 G1YbkazG c8OehZsA
  5. Establish the server where we will connect
    lN8Jtz2R6pq8Q 67hNzdkSYN3VJ aZIP
  6. Switch to GPRS mode to begin transmission UDP
    mUZVlwoHgc5S3w
    or
    2qflH7d6Ol

To check settings 4hYJLMKRj39