Low Cost GPS Car Tracker PT100
1.Tracking via SMS or live tracking by GPRS
2.Tracking by time interval
3.Position logging capacity up to 3,000+ waypoints
6.Low power alert
7.Cut power alert
8.Over speed alert
9.Engine cut (optional)
10.Get street address by SMS request
11.Get Google link for current location by SMS request
12.Save 50% GPRS cost above in different methods when working on FMS (BOFAN Smart Report Tech, ACC, Mileage report)
13.Available to set different alarm notification methods when alarm (sending alarm SMS, calling or platform)
14.Mileage and GPRS report by distance
15.Internal GSM antenna
16.I/O: 2 digital inputs, 1 negative and 1 positive triggering; 1 outputs
17.Analog Input: 1 10 bits resolution analog inputs
To set a Bofan device on NstJT1rmYfZh are configured through text messages, it is necessary to confirm these commands with user manual, then you need to configure as follows.
With the following commands through several text messages: In the example it is assumed that the device password is 000000 which is the initial of the device and data APN from your operator.
The most common commands for these enabled devices are placed (You should consult your manual).
- Delete settings
- Set 14-digit identifier to be used with NstJT1rmYfZh normally the last 14 digits of IMEI, replace XXXX by the identifier.
- Set the APN of your operator, the values Replace your operator
- Establish the server where we will connect.
- How often we want to establish the position is sent every 1 minute